Thesis Defence: Amir Einipour Rashti (Master of Applied Science in Engineering)
You are encouraged to attend the defence. The details of the defence and attendance information is included below:
Date: November 21, 2024
Time: 12:00 PM to 2:00 PM
Defence mode: Remote
Virtual Attendance: via Zoom
LINK TO JOIN: Please contact the Office of Graduate Administration for information regarding remote attendance for online defences.
To ensure the defence proceeds with no interruptions, please mute your audio and video on entry and do not inadvertently share your screen. The meeting will be locked to entry 5 minutes after it begins: please ensure you are on time.
Thesis entitled: Brittle Failure of Cross-laminated Timber at Connections with Self-Tapping Screws
Abstract: Cross-laminated timber (CLT) is becoming increasingly popular in construction, but its crosswise layup structure leads to distinct brittle failure modes compared to solid timber or glulam. Self-tapping screws (STS) are widely used as fasteners in timber construction and typically exhibit ductile failure when loaded laterally. However, when screws are installed at an angle, brittle failure modes may become critical, influencing design. Although the 2024 edition of the Canadian Standard for Engineering Design in Wood (CSA O86) includes provisions for connections with STS, there is limited guidance for estimating the resistance of CLT connections under brittle failure conditions.
In this study, experimental and analytical investigations were conducted to examine the brittle failure modes and load-carrying capacities of CLT connections with STS. In the experimental phase, uniaxial tension tests were conducted on CLT connections with STS installed at a 45º angle. A total of 18 test series were performed, encompassing various connection layouts that considered CLT lay-up, screw penetration length, edge distance of the connection, and screw arrangements.
Following the experimental phase, an analytical investigation was carried out on available test data to evaluate the predictive ability and limitations of current models for brittle failure in CLT. Based on these findings, a new approach for predicting brittle failure in CLT connections with inclined STS was proposed.
Examining Committee:
Chair: Dr. Hossein Kazemian, University of Northern British Columbia
Supervisor: Prof. Thomas Tannert, University of Northern British Columbia
Committee Member: Prof. Alexander Salenikovich, University of Laval
Committee Member: Dr. Jianhui Zhou, University of Northern British Columbia
External Examiner: Dr. Ying-Hei Chui, University of Alberta
Contact Information
Graduate Administration in the Office of the Registrar, University of Northern British Columbia
Email: grad-office@unbc.ca
Web: https://www2.unbc.ca/graduate-programs